HH Scalar SR2000 Power Amplifier
Special Price
AUD899.00
Regular Price
AUD1,199.00
Out of stock
Overview
The HH Scalar series of amplifiers are the perfect complement to any passive PA cabinets, whether monitors, front of house or subwoofers.
We have managed to source some of these at an amazing price!
Efficient, lightweight switch-mode power supplies and high quality Class H amplification circuitry ensure perfect sound and effortless power from surprisingly light and compact amplifiers, whilst still maintaining impressive bass response.
Styled with a nod to our much respected amplifier heritage, these are nonetheless thoroughly modern high performance amplifiers with all the flexibility, performance and reliability required for today’s live music scene.
Providing a genuine 1kW per side into 4 ohms, and the full 2000W into 8 ohms in bridge mode this amp needs the high current rated Neutrik Powercon mains lead !
Our ratings are not ‘peak power’, or for a split second before the amp shuts down ; we state the true RMS usable power that the amp will do all day every day.
Essential for big subwoofers (such as the TNS-118), and for ensuring clarity and dynamics from big systems the SR2000 is the perfect partner for all high quality PA.
2U Rackmount Power Amplifier
2 × 600W stereo, 2000W Bridged (EIA standard) (8 ohm load)
2 × 1000W stereo EIA standard. 2600W Bridged (40ms * 1kHz burst 1% THD) (4 ohm load)
2 × 1250W stereo (40ms 1kHz burst 1% THD) (2 ohm load)
Class 2H circuit with switch-mode power supply
Variable speed fan cooled
SPECIFICATION
Controls & features 2 x illuminated volume, Stereo / parallel / Bridge mode switch, Sensitivity Switch, Hi Pass filter switch, illuminated logo
Cooling Variable speed fan cooled
Crosstalk >70dB
Damping Factor >200 (8 ohm stereo, 1kHz)
Design Class 2H circuit with switch-mode power supply
Dynamic Range >80dB
Frequency Response 20Hz - 20kHz +/- 0.25dB
Indicators Power, Signal, Clip, Mode, Protect (ch1 & ch2)
Input Impedance Balanced 20K, unbalanced 10K
Input Sensitivity 26dB/32dB (2.48V/1.244V)
Product Type 2U Rackmount Power Amplifier
Protection Temperature, short circuit, DC, VHF, low power, Clip
Rated Power 2 Ohm 2 x 1250W stereo (40ms 1kHz burst 1% THD) (2 ohm)
Rated Power 4 Ohm 2 x 1000W stereo EIA standard. 2600W Bridged (40ms 1kHz burst 1% THD) (4 ohm)
Rated Power 8 Ohm 2 x 600W stereo, 2000W Bridged (EIA standard) (8 ohm)
S/N Ratio >85dB
Signal connections 2 x Balanced XLR/jack combi inputs, XLR link outputs
Slew Rate 20V/ms (8 ohm stereo, 1kHz)
Speaker Connections 2 x speakon socket & 2 pairs Binding Posts
THD + N <0.05% (8 ohm stereo, 1/4 rated power, 1kHz)
Voltage Gain 26dB/32dB
Mains Lead Neutrik Powercon
Dimensions (HxWxD) (mm) 89 x 483 x 445mm (2U 19") (3.5 x 19 x 19.5 inch)
Weight 11.1Kg
Packed Volume 0.051m3 (1.8 cu. Ft)
Weight | 11.100000 |
---|---|
Manufacturer | H&H |
Wattage at Ohmage | 600w X 2 @ 8 ohms, 1,000 w X 2 @ 4 ohms |
Input Types | 1/4 Inch Jack |
Output Types | 1/4 Inch Jack |
Rack Mountable | Yes |
Write Your Own Review