Line6 DT25HD 25W / 10 W Valve Head
Line6 DT25HD 25W / 10 W Valve Head in stock at Music Park's Perth store.
Line6 DT25HD 25W / 10 W Valve Head at Music Park
DT25 Amplifier Head
Four Boutique Tube Amps In One
Boutique sound and performance
• Uniquely versatile tube amp design
by Reinhold Bogner
• Advanced HD modeling technology
If your tone is your masterpiece, DT25 is your
paintbrush.
This portable 25W/10W tube amp from
Line 6 and tube-amp guru Reinhold Bogner gives
you four stunning, lust-worthy amp voicings and
unprecedented versatility that lay the foundation for you to build your perfect tone.
The powerful combination of reconfigurable analog components and HD modeling allows DT25 to be four amps in one capable of producing American cleans, British crunch, class A chime and modern high-gain.
Selectable operating class, power tube mode and
four Voicings (which offer the perfect combinations of negative feedback loop topology, and HD preamp and tone stack modeling) can dial in classic vintage tones or be shaped into highly customized originals – and each one drips with boutique tone and touch-response.
Got a POD® HD multi-effects processor? Connect it to DT25 via L6 LINK ™ and watch the two seamlessly integrate into a boutique amp factory!
Add effects, additional amp voicings, foot control and instant scalability (including stereo operation with multiple DT25 amplifiers). DT25 is the perfect pairing for POD HD.
The days of plugging a POD into the front of an amp are over!
Features
• Flexible tube section designed by tube-amp guru
Reinhold Bogner
• Instantly reconfigurable per channel
• Selectable operating class (Class AB/25 Watts/Fixed
Bias or Class A/10 Watts/Cathode Biased)
• Selectable power tube mode (Pentode or Triode)
• Four unique Voicings (negative feedback loop topologies
paired with HD preamp and tone stack modeling):
• Classic American Clean/Tight NFL
• British Crunch/Medium NFL
• Class A Chime/Zero NFL
• Modern, High-Gain/Resonant NFL
• (1) 12AX7, (2) EL84 tubes
• Custom Celestion® G12H90 speaker
• 4/8/16 ohm speaker outputs
• Series effects loop
Four Boutique Tube Amps In One
Intuitive, 2-channel design
• Back-lit front panel
• HD amp modeling technology fuels each Voicing’s preamp and tone stack, and automatically pairs them with corresponding Bogner-designed dynamic analog
circuitry
• Modeled spring reverb with individual level control per channel
• Cabinet simulated direct output
• Low Volume Mode provides cranked up tube tone at whisper-quiet volume
• Speaker jack-sensing provides relay driven output transformer protection circuit
• L6 LINK connects DT25 to POD HD for additional
effects, amp voicings and instant scalability (including stereo operation with multiple DT25 amplifiers) – all controlled by any L6 LINK equipped POD HD
Music Park in Perth Western Australia carry a great range of Line6
Manufacturer | Line 6 |
---|---|
Amplifier Type | Head Unit |
Modelling Amplifier (Y/N) | No |